IsoAcoustics OREA Series

INTRODUCTION

About Orea Series audio isolation feet

Experience the Orea Series audio component isolation feet, designed to eliminate parasitic vibrations and provide greater sound clarity and focus. Ideal for electronic components such as Amplifiers, DACs, CD Players, Speakers, and Turntables, the OREA isolation feet are made of machined stainless steel and feature a low-profile design to minimize any increase in height.

Each OREA model is designed with a different weight capacity. They each have a coloured ring on the bottom isolator that denotes the model and weight capacity. The OREA series are packaged individually to allow greater flexibility when determining the number of units to use. We recommend a minimum of 3 units under each component, depending on weight.

PRODUCTS

OREA Graphite

Dimensions (WxH) 1.6″x1.1″ (40x27mm)​

OREA Bronze

Dimensions (WxH) 2″x1.1″ (50x29mm)​

OREA Indigo

Dimensions (WxH) 2.3″x1.3″ (58x33mm)​

OREA Bordeaux

Dimensions (WxH) 2.6″x1.4″ (67x36mm)​

TECHNOLOGY

Greater sound clarity

The upper flange of the OREA’s are designed to provide a suction cup like effect and adhere to the underside of the component, while the lower flange adheres to the supporting surface. All the energy is managed within the core of the OREA’s, which are tuned to work within specific weight ranges. This results in greater sound clarity and a more open soundstage providing authentic, three-dimensional sound.

Works with or without feet

The existing feet on an audio component may connect well and fit nicely around the perimeter of the OREA isolator. Alternatively, you may get better performance by either removing the feet entirely or placing the OREA’s beside the existing feet to have them connect directly to the chassis or base of the component.

Which components benefit the most from isolation?

All audio equipment will benefit from isolation. The biggest gains can be achieved by isolating speakers and subwoofers. Isolating turntables, tube amplifiers, and CD players are good places to start because they are particularly sensitive to vibration. Isolating Preamp tubes is important as issues will be amplified later in the chain.

What is the difference between the ISO-Puck and the OREA series?

The ISO-PUCK was originally designed for the pro audio and Musical Instrument (MI) channel, and used with studio monitors, guitar/bass amps, DJ turntables, etc. The OREA, on the other hand, is designed for home audio. The performance curve for the OREA models are narrower in weight range and will provide a slightly stronger sonic benefit in its range than the ISO-PUCKs. The more effective isolation results in more sound clarity and focus.

Click here for more information on the difference between the ISO-Pucks and OREA's

What is the difference between the Aperta series and OREA series?

The Aperta series is recommended if your speakers would benefit from tilt adjustment to better focus the tweeters to ear level. If your speakers are already at the correct height, then the OREA series is recommended as a low-profile isolation solution.

Does the OREA work with speakers?

Yes, the OREA series can be used with speakers.

Can the OREA’s be positioned underneath the existing feet?

Is the suction cup connection required for the OREA’s to work properly?

The suction cup effect is not required for a strong connection. The OREA’s will have a suction cup connection to smoother surfaces. For textured surfaces, the OREA’s will have a strong friction grip.

How do I choose which OREA model to use with my speaker or component?

We recommend choosing the OREA model based on the weight of the speaker or component that they will be supporting. It is common to use 3 or 4 OREA isolators for each component or speaker. The weight capacity per OREA isolator is as follows:

• OREA Graphite – 4 pounds (1.8 KG) per isolator
• OREA Bronze – 8 pounds (3.6 KG) per isolator
• OREA Indigo – 16 pounds (7.2 KG) per isolator
• OREA Bordeaux – 32 pounds (14.4 KG) per isolator

We recommend using the IsoAcoustics Online calculator for determining which model to use with your speaker or component.

How are the weight limits determined?

The specified weight limits are determined based on the performance curves. The products can support additional weight without harm, but the isolation performance is beginning to decline above the specified weights.

What are the benefits of isolating equipment?

Equipment can be sensitive to vibrations and forces. Removing parasitic vibrations releases new levels of sound clarity and openness when used with amplifiers, DAC’s, CD Players, turntables, and more.

What direction should the IsoAcoustics logo on the OREA’s be facing?

When used with speakers, optimal results are achieved by positioning the OREA’s with the logo facing forward, in line with the speaker’s drivers. When using the OREA’s on turntables and other electronic components, the orientation of the IsoAcoustics logo will have no impact on the performance.