IsoAcoustics GAIA Neo Series

How has the isolation been improved from the GAIA Neo vs the previous GAIAs?

The GAIA Neo builds on the same patented isolation design as the original GAIA series but incorporates refined internal isolators with adjustments to shape, thickness, and durometer. These changes are the result of continued R&D and performance testing. These enhancements deliver improvements in clarity, focus, and low-frequency definition, while the original GAIA models continue to offer excellent performance and remain part of our lineup.

Learn more here >

My speakers don’t have threaded feet, can I still use them on the GAIA Neos?

No, the GAIA Neo requires a connection with a threaded insert.

Threaded inserts are available at most hardware stores and can be installed in the base of many types of speakers, but this is not typically recommended because of the risk of damaging the speaker.

When will the GAIA Neo be available?

The GAIA Neo is expected to be available in Q3 2025. The GAIA-TITAN Neo will be available a few months later.

Is the IsoAcoustics Logo applied on both sides of the GAIA Neo and GAIA-TITAN Neo?

Yes, the logo is applied on both sides to make it easier to align the isolators correctly during installation. The O-Ring will compress and allow for aligning the isolators with a strong connection.

How is GAIA Neo different from the original GAIA models?

GAIA Neo builds on the original GAIA design with: 

• Seamless height adjustment using a rotating lower ring.
• An improved flush-fit design with integrated O-ring (no lock nuts).
• Easier installation.
• Floor-Sliders for simple speaker positioning.
• Available in black and dark chrome finishes.

Which GAIA Neo model will perform best for my speakers?

The GAIA Neo model should be selected based on the weight that they are supporting. The weight limits we set are based on the performance curve. The GAIA perform well up to the specified weight limits. We do not recommend exceeding the weight limits of the GAIA Neo’s or TITAN Neo’s.

How is the GAIA Neo Series installed?

Install the Threaded Adapter - Choose the correct threaded adapter for your speaker or component and thread it into the bottom of the speaker or component.

Attach the GAIA Neo Isolators - Screw each GAIA Neo isolator onto the installed adapter until the O-Ring compresses and the isolator sits firmly against the bottom of the speaker. Align the IsoAcoustics logo to face forward, in line with the front of the speaker.

Note: An optional compression washer is included and is recommended when the O-Ring has limited contact with the speaker base or outrigger

Prepare the Floor Sliders - Place the included floor sliders under each GAIA Neo isolator.

• On solid floors: apply the adhesive felt pads to the bottom of the sliders.

  
  

• On carpeted floors: use the sliders without felt pads.

  
  

Position the Speaker - carefully slide the speaker into position using the floor sliders.

Level and Adjust - Rotate the lower ring on each GAIA Neo to fine-tune the height. This allows you to level the speaker, adjust the focus, and ensure even weight distribution across the isolators.

Listen and Fine-Tune Placement - After initial setup, listen to the system and make any needed adjustments to the speaker’s position or isolator height. Once satisfied, tilt the speaker one side at a time to remove the floor sliders.

The weight of my speaker is slightly above the maximum weight. Will the GAIA Neo still perform?

We do not recommend exceeding the specified weight limit. The weight limits are set based on the performance curve, not based on how much weight they can support. The performance of the GAIA Neo is still strong at the weight limit, but is quickly declining above this weight.

How do I determine what the thread size is for my speaker?

Please click here for information on thread sizes and instructions on how to determine the thread size for your speaker or subwoofer. 

How to order alternate size threads for the GAIA Neo

If the included thread sizes don't match your speakers, you can order alternate thread adaptors through the dealer where you purchased your GAIA Neo or via an IsoAcoustics distributor. Click here for distributor contact info. If you have any trouble, please don’t hesitate to contact us directly at info@isoacoustics.com

Can the GAIA Series be used on stand mounted speakers?

If the speakers are fastened to the stands, then they tend to act as one and the GAIA Neo series are recommended for installation on the floor stand. 

If the speakers are resting on top of the stands, then we recommend isolation between the speaker and the stand. The OREA series are a great option in this case.