IsoAcoustics Home Audio

How has the isolation been improved from the GAIA-TITAN Neo vs the previous GAIA-TITANs?

The GAIA-TITAN Neo builds on the same patented isolation design as the original GAIA-TITAN series but incorporates refined internal isolators with adjustments to shape, thickness, and durometer. These changes are the result of continued R&D and performance testing. These enhancements deliver improvements in clarity, focus, and low-frequency definition, while the original GAIA-TITAN models continue to offer excellent performance and remain part of our lineup.

Learn more here >

My speakers don’t have threaded feet, can I still use them on the GAIA-TITAN Neos?

No, the GAIA-TITAN Neo requires a connection with a threaded insert.

Threaded inserts are available at most hardware stores and can be installed in the base of many types of speakers, but this is not typically recommended because of the risk of damaging the speaker.

When will the GAIA-TITAN Neo be available?

The GAIA-TITAN Neo is expected to be available in Q3 2025. The GAIA-TITAN Neo will be available a few months later.

Is the IsoAcoustics Logo applied on both sides of the GAIA Neo and GAIA-TITAN Neo?

Yes, the logo is applied on both sides to make it easier to align the isolators correctly during installation. The O-Ring will compress and allow for aligning the isolators with a strong connection.

How is GAIA-TITAN Neo different from the original GAIA-TITAN models?

GAIA-TITAN Neo builds on the original GAIA-TITAN design with: 

• Seamless height adjustment using a rotating lower ring.
• An improved flush-fit design with integrated O-ring (no lock nuts).
• Easier installation.
• Floor-Sliders for simple speaker positioning.
• Available in black and dark chrome finishes.

Can I install the GAIA Neo or TITAN Neo isolators on my own

Installation should be handled with extra care for both GAIA Neo and GAIA-TITAN Neo, especially with heavier speakers.

We recommend installation by at least two people, and in some TITAN Neo applications, three may be required. One person should stabilize the speaker while another removes the existing foot or spike and installs the isolator.

Only tilt the speaker as much as safely needed. Avoid dragging the speaker or placing uneven stress on the cabinet, base, or outriggers. Once installed, confirm that each isolator is securely threaded, properly aligned, and supporting the speaker evenly.

Which GAIA-TITAN Neo model will perform best for my speakers?

The GAIA-TITAN Neo model should be selected based on the weight that they are supporting. The weight limits we set are based on the performance curve. The GAIA-TITAN perform well up to the specified weight limits. We do not recommend exceeding the weight limits of the TITAN Neo’s.

How is the GAIA-TITAN Neo Series installed?

Install the Threaded Adapter – Choose the correct threaded adapter for your speaker or component and thread it into the bottom of the speaker or component.

Attach the GAIA-TITAN Neo Isolators – Screw each GAIA-TITAN Neo isolator onto the installed adapter until the O-Ring compresses and the isolator sits firmly against the bottom of the speaker. Align the IsoAcoustics logo to face forward, in line with the front of the speaker.

Note: An optional compression washer is included and is recommended when the O-Ring has limited contact with the speaker base or outrigger

Prepare the Floor Sliders – Place the included floor sliders under each GAIA-TITAN Neo isolator.

• On solid floors: apply the adhesive felt pads to the bottom of the sliders.

  
  

• On carpeted floors: use the sliders without felt pads.

  
  

Position the Speaker – carefully slide the speaker into position using the floor sliders.

Level and Adjust – Rotate the lower ring on each GAIA-TITAN Neo to fine-tune the height. This allows you to level the speaker, adjust the focus, and ensure even weight distribution across the isolators.

Listen and Fine-Tune Placement – After initial setup, listen to the system and make any needed adjustments to the speaker’s position or isolator height. Once satisfied, tilt the speaker one side at a time to remove the floor sliders.

The weight of my speaker is slightly above the maximum weight. Will the GAIA-TITAN Neo still perform?

We do not recommend exceeding the specified weight limit. The weight limits are set based on the performance curve, not based on how much weight they can support. The performance of the GAIA-TITAN Neo is still strong at the weight limit, but is quickly declining above this weight.

How do I determine what the thread size is for my speaker?

Please click here for information on thread sizes and instructions on how to determine the thread size for your speaker or subwoofer. 

How to order alternate size threads for the GAIA-TITAN Neo

If the included thread sizes don’t match your speakers, you can order alternate thread adaptors through the dealer where you purchased your GAIA-TITAN Neo or via an IsoAcoustics distributor. Click here for distributor contact info. If you have any trouble, please don’t hesitate to contact us directly at info@isoacoustics.com