The K10 brings flagship scale to the listening room with effortless bass, a transparent midrange and finely extended ribbon-tweeter air. Dual 8-inch Kevlar woofers, dedicated midrange drivers and a heavily built cabinet underpin its authoritative, spacious presentation; StereoNET United Kingdom highlights the design’s smooth highs, deep low-end reach and premium-electronics ambition.
WATT RECOMMENDS
Save your favorites. Compare them anytime.
Create a free HiFi Hub account to save products to your Wishlist and compare your favorites side by side.
Deliciously Crispy
Sound Quality
93/100
Build Quality
96/100
Features Connectivity
80/100
Value for Money
82/100
Pros
Dual 8-inch Kevlar bass drivers and the K Series porting arrangement are designed to deliver extended, effortless bass.
Dedicated midrange drivers and the classic ribbon tweeter target transparent mids with smooth, refined high frequencies.
Slim, elegant, rigidly damped cabinet construction supports a premium flagship design.
WATT RECOMMENDS
Save your favorites. Compare them anytime.
Create a free HiFi Hub account to save products to your Wishlist and compare your favorites side by side.
SOUND QUALITY PERFORMANCE 93/100
Bass
94/100
Dual 200mm (8") ProAc woofers and a claimed 20Hz-30kHz response suggest robust low-frequency extension and authority for a large tower. Heavy 57kg cabinets imply solid internal volume and control. No independent measurements provided; score based on driver complement, claimed response and cabinet mass.
Mid
92/100
Dedicated 75mm (3") light-diaphragm mid with an open felt rear aims to reduce coloration and deliver natural timbre and vocal presence. Split crossover and quality components imply careful midrange integration. Score reflects likely excellent timbre and coherence from the specified drivers and crossover.
Treble
93/100
ProAc ribbon tweeter with rear chamber damping and an Alnico magnet points to very clean, extended upper frequencies with air and detail. Ribbon designs can be highly resolving without excess glare when properly damped, as specified. No reviewer reports to confirm subjective balance.
Soundstage Imaging
94/100
Ribbon tweeter plus a dedicated mid and large, well-engineered cabinet suggest strong image focus, width and layering potential. ProAc's design choices (light mid, ribbon, heavy cabinet) historically favour holographic presentation. Score inferred from driver topology and stated design intent.
Dynamics
92/100
High sensitivity (91.5 dB) and a broad recommended amplifier range (10–500 W) indicate good dynamic capability and headroom with appropriate amplification. Dual 8" woofers and stiff cabinet construction support both micro- and macro-dynamics. Lack of listening reports tempers the rating slightly.
Assessments of Build Quality, Usability, and Overall Propositions.
Build Quality
96/100
Substantial 57kg cabinets, premium finish options, dedicated dual-layer crossover PCB, oxygen-free multistrand wiring and detailed driver construction point to very high build and component quality. Engineering choices (bracing implied by mass, rear-damped ribbon) support outstanding mechanical quality.
Features Connectivity
80/100
Passive floorstanding baseline applied. Crossover is split for optional bi-wiring/bi-amping per spec (bi-wire present but score capped at passive baseline). No DSP/streaming expected or penalized.
Value for Money
82/100
Price was not provided in the input and no independent reviews/comparisons were available. Given premium materials, heavy construction and bespoke finishes, these are likely premium-priced speakers; rating is cautious in absence of price/peer comparisons.
Reviews & Sources
Professional reviews and sources for this product's Watt'n Potatoes analysis.
Online Reviews & Mentions
YouTube Reviews
Forum Mentions
No forum mentions found yet
Specifications
- Nominal Impedance
- 4 ohms
- Recommended Amplifiers
- 10 to 500 watts
- Frequency Response
- 20Hz-30Khz
- Sensitivity
- 91.5 dB linear for 1 watt at 1 metre
- Bass Driver
- 2x ProAc, 200mm (8”) professional drive units fitted with pure polymer impregnated and polished Kevlar weave cone with rear lacquer and concentric weighting.
- Midrange
- ProAc 75m (3”) light diaphragm unit with a new open felt back to help with colouration from the rear.
- Tweeter Ribbon
- The ProAc ribbon tweeter has a ribbon lighter than a human hair with rear chamber damping and alnico magnet.
- Crossover
- Finest components on dedicated dual layer circuit board. ProAc Multistrand oxygen free copper cable throughout. Split for optional Bi wiring or Bi amplification
- Height (Cabinet)
- 1499mm (59”)
- Width (Cabinet)
- 297mm (11.7”)
- Depth (Cabinet)
- 457mm (18”)
- Weight
- 57kg (126lb) each cabinet
- Mode
- Floor standing
- Grille
- Acoustically transparent crimplene. Magnetic grilles available with certain finishes.
- Standard Finishes
- Black Ash, Mahogany, Cherry, Natural Oak, Silk White and Walnut.
- Premium Finishes
- Liquidambar, Rosewood, Ebony, Tamo Ash *Premium Finishes to order at extra cost*
Manufacturer's Description — ProAc Loudspeakers
ProAc would like to introduce the flagship model K10.
The design team at ProAc has been striving for years to achieve a natural sound and in our opinion, we have achieved this. The K10 boasts excellent midrange detail and an impressive sound stage.
The unique K10 cabinet design has been further developed incorporating our proven 8-inch Kevlar coned bass driver, giving a wonderfully extended and natural bass response.
The K10 features the latest ProAc midrange unit with an ultra-lightweight 3-inch domed diaphragm loaded by a redesigned wave guide. This driver also has a felt open back to remove colouration, helping to achieve an outstanding open sound with exceptional detail.
The crossover on the K10 has been further modified, allowing the midrange to work to a higher frequency, which not only increases the power handling but also reveals detail that was previously not heard.
Our ProAc ribbon tweeter, as used throughout the K Series range, gives a sweet and detailed high frequency.
We urge people who are looking for the ultimate in sound reproduction to audition our flagship K10.
Featured veneer: Dark eucalyptus
Some finishes are now available with magnetic grilles, please check with your nearest dealer.
Verified Dealers
Online Dealers
All Dealers
Zoom out the map to see more dealers
Authorized dealers for ProAc Loudspeakers K10
- Acoustic Streams — in-store — Lower Drift, England, United Kingdom (website)
- Adventures in HiFi — in-store — Chester, England, United Kingdom (website)
- Alta Fedelta — online and in-store — Lombardia, Italy (website)
- Art & Voice — online (website)
- Audio Affair — online and in-store — Deritend, England, United Kingdom (website)
- Audio Concepts - USA — in-store — Dallas, Texas, United States (website)
- Audio Connection — online and in-store — Verona, New Jersey, United States (website)
- Audio Evolution — online and in-store — Volla, Campania, Italy (website)
- Audio Republic — in-store — Gateshead, England, United Kingdom (website)
- Audio T — online and in-store — Cheltenham, England, United Kingdom (website)
and 54 more verified dealers