Phasemation Balanced Transmission Type Phono CableCC-1000D

Product Concept

MC cartridges are small generators.
Both the coil of positive and negative generates electricity ungrounded and therefore it is a balanced type.
However it was used as an unbalanced transmission and the balanced transmission was not used for a long time.
To bring this into effect, the MC1 position of EA-1000 is equipped with a balanced type input transformer.

By developing a balanced transmission type phono cable to support this, transmission losses were rid as much as possible and succeeded to bring about the maximum performance of EA-1000.
We will release this product for achieving a good sound quality of the vinyl record to be played.

Main Characterisitics

A Balanced Transmission Type Phono Cable That Uses 2-Core Shield Cables.

For the CC-1000 series, we developed an original 2-core shield cable that transmits weak signals of the cartridge to the phono amplifier without any losses.
The signal cable uses 7 wire strands of 0.32 diameter oxygen-free conductors.

A 5PIN-DIN Terminal With Disconnection-Preventing Wires To Avoid Disconnecting Accidents Beforehand

We often hear contacting failures on the 5PIN-DIN terminal. This is because wiring is done on a very thin connector and when stress is applied, it is the cause of disconnections and contacting failures.
For the CC-1000D, we developed a 5PIN-DIN plug with wires attached that prevents disconnections and because of this, the removal can be done by pulling the wire and can prevent disconnection accidents beforehand.