The Mu-7R mk2 Intercable uses Mu-metal as a braided shield, which protects the signal from both kinds of noise. Other audio cable manufacturers tend to use copper or silver shields for signal cables. These are effective only for electric noise, not for magnetic interference.

• Mu-metal braided shield for reducing electromagnetic noise up to max. 98%
• 1000 °C hot melt welding of cable terminations and wire
• Optimum thickness of wire
• MRCT

Zero Loss Technology & Mu-metal Shield

Allnic Audio’s speaker cables, power cables, phono cables, and interconnect cables use Zero Loss (ZL) Technology for eliminating audio cable signal loss by minimizing three resistances; Linkage Resistance, Contact Resistance, and Wire Resistance. All of Interconnect cables use Mu-metal as a braided shield. Signal cables use Mid-Range Control Technology (MRCT).

Carved out heat-treated Beryllium copper terminals for permanent contact pressure

Contact resistance is a very important factor in signal transmission. Higher contact pressure and larger contact surface mean less contact resistance and better signal transfer. With traditional bronze, pure copper or phosphorous copper terminals you could not have enough contact pressure nor permanent one. With our carved out, slit, heat-treated Beryllium copper terminals, you have strong and permanent contact pressure for minimum contact loss.

 Allnic’s patented, maintenance-free terminations.

With our patented double blade terminals of speaker cables, you do not need to go backside of your loudspeakers every month to retighten your binding posts. Our double blade terminals not only hold tight against severe vibration of speakers but also minimize contact resistance, so please do not go backside for years. Every termination for XLR, RCA, and banana is split into multi-faces with an inner elastomer core that constantly applies outward pressure to those faces. In case of power cables, Beryllium copper, 4-surface, plate-spring loaded, box-like clips in IEC sockets and for North American style plug blades. Schuko style male plug pins made of beryllium copper split into 6 sections with inner high elastic rubber.

Mu-metal shielding for true protection from EMI

With traditional copper or silver meshed shield, you have not enough protection from magnetic noise. Copper or silver could protect well against electric noise, but very poorly does against magnetic one, because magnetic signal freely penetrates copper or silver. Only Mu-metal (Nickel alloy material) could protect your audio signal from both electro-magnetic noise. Data shows Mu-metal reduces magnetic noise to 1/32 times( – 32dB), of course, it protects electric noise perfectly either.

Hot melt welding

With traditional soldering or clamping connection between terminal and conductor, you have two resistant barriers(solder has much bigger resistance than copper or silver). Our direct hot melt welding without solder connection removes two obstacles on signal path, by melting terminal and conductor into one material.

MRCT®. Mid-Range Control Technology

Allnic considers that an exaggerated, protruding mid-range is the most formidable obstacle to harmonious signal transfer. Allnic’s MRCT uses metal platings for slight mid-range “braking” and heavier wire gauges for low frequency transmission, and controls capacitance to ensure usually evasive superbly realistic high frequency reproduction.

If you want to experience Allnic Audio’s products,

please contact your local authorized dealers or

Audio Mentors, which is Allnic Audio’s design & marketing company.